electroetching

“Quick Shine” Acrylic Floor Polish as an Etching Resist by Anna Olafsson

Electro-etchings on steel plates with Quick Shine Floor Finish as an alternative to traditional liquid hard grounds.

Read More

Acrylic Floor Polish Resist on Steel Plates - Hard Ground and Crisco Lift by Anna Olafsson

Acrylic floor polish as hard ground and crisco lift, tested at 1V on steel plates, electro-etched in ferrous sulphate solution for 60 mins. The process and the printed results!

Read More

The Results of the Acrylic Ground Experiments at the DCA Print Studio by Anna Olafsson

Testing Acrylic Grounds at the DCA Print Studio - The Results!

Read More

Where Did I Learn How to Electro-etch? by Anna Olafsson

Some photographs from the workshop-residency I attended in July 2018 at the home of Alfonso Crujera, electro-etching pioneer, master printmaker, painter and sculptor, based on the island of Gran Canaria.

Read More

Steel Plate Electro-Etching Experiments by Anna Olafsson

The first proofs of my electro-etching experiments on steel plates, made in my home studio and printed at the DCA - Dundee Contemporary Arts Print Studio.

Read More

First Electro-Etching Class at the DCA Print Studio, Dundee by Anna Olafsson

Since December 2018 I have been working with the Dundee Contemporary Arts (DCA) Print Studio to set up an electro-etching facility there. Over the last few months we have been sourcing power supplies, cables etc., as well as testing plates and alternative resists. There has been quite a lot of interest in the technique from print studio members who have seen me with many pieces of odd-looking equipment, as well as the test plates I have been printing. I have also carried out staff training so that more printmakers can begin to access the setup.

We now have a small-scale improvised active electro-etching tank in the acid room, with a passive etching tray beside it. This equipment is starting to be used for public classes, which is really exciting.

I designed and ran the first public weekend session with the electro-etching equipment on Saturday 18th to Sunday 19th May 2019. I had a great time teaching all of the printmakers over both days, and hope to run some more classes very soon. Many thanks to all who came along - you worked very hard and got some great results!

I hope that electro-etching at the DCA will continue to grow over the next few months as more printmakers join my classes, and as we carry out more print experiments. I believe there will be a great deal of interest from the wider Scottish printmaking community in this fascinating medium.

Here are a few images from the weekend: